I thought I could have channel 1 on my mixer with FX and Channel 2 dry and pan left and right at the Master output to my DAW.
But the internal FX of my Behringer mixer always affect both left and right channels…
Seems wrong
I thought I could have channel 1 on my mixer with FX and Channel 2 dry and pan left and right at the Master output to my DAW.
But the internal FX of my Behringer mixer always affect both left and right channels…
Seems wrong
Doesnt sound right at all- after all channel 1 would be 1 instrument and 2nd another - is there not an FX mix or on/off - which model do you have?
I have a Behringer 1240 FX -Pro, a hand-me-down that I’ve had for a few years and dabbled with now and then… never used the FX much but got interested in that module recently.
Today I discovered a sticky button… made troubleshooting maddening until I found it.
Beginning to suspect there’s a short.
On board FX from any channel goes to left and right in the main mix no matter what I try…
I can get a dry signal on left or right or mix… but FX is MONO both sides even when panned 100%
Aaaaarghhhhh