I have a hs80 (Juno 2 with speakers) with a no sound issue that I've narrowed down but am not sure how to fix. The volume board has 2 connectors CN1 and CN2. When I touch all 5 solder points on the back of CN1 I get sound... Let go, no sound. I tried touching individual points and get nothing. It only works when touching all 5. My electronics knowledge is pretty limited. Any idea what the fix is or do I need a new volume board? Thanks
Last edited by oDDgOD; 21-08-2016 at 05:36 PM..
Anybody can be good at something but it takes real effort to suck as bad as I do.
you touching the connections COULD be allowing current to flow to those points, when you let go you lose sound... so, no current. you might have a cold/cracked solder point in there and a simple re-heating of the point could be the fix full disclaimer... without seeing it I'd not take my advice!!!